＊Material: Carbide (K10). ＊D<3.6: Male type for both side, others: center type. ＊D<1.5: shank dia. is 1.5, others: shank dia. is the same with Dia.

＊Material: HSS-CO. ＊D1~D2.5: 2-Flute, Others: 3-Flute. ＊Helix Angle-Left40°(under D1.9), 50°(over D2.0). ＊Hardness: 66~67HRC. ＊Suitable for High rpm and heavy cutting.

＊Left-handed spiral design for excellent chip evacuation. ＊Reamer suitable for deep hole machining due to the shank. diameter being smaller than the blade diameter.

＊Left-handed spiral design for excellent chip evacuation. ＊Reamer suitable for deep hole machining due to the shank diameter being smaller than the blade diameter.

＊Due to the shank diameter being smaller than the blade. diameter, this reamer is suitable for deep hole machining.

＊Suitable for high-hardness materials up to HRC 70. ＊Adopts a Si-based coating with excellent heat resistance. ＊Adopts a negative rake edge for a stronger cutting edge.

＊Left-handed spiral design for effective chip evacuation ＊Reamer for machine work with a cutting angle of 45°

＊Left-handed spiral design for effective chip evacuation. ＊Reamer for machine work with a cutting angle of 45°. ＊Long type of SPMR.

＊Reamer suitable for deep hole machining due to the shank diameter being smaller than the blade diameter. ＊Left-handed spiral design for effective chip evacuation. ＊Reamer for mechanical work with a chamfer angle of 45°.

＊Material:Carbide. ＊High Helix Angle60°.

＊Material:Carbide. ＊Highle Helix Angle 60°. ＊Point with End Mill Flute.

＊1/10 size and 1/100 size are available. ＊OD-tolerance: +0.002~+0.008.

0

*Reamer suitable for deep hole machining due to the shank diameter being smaller than the blade diameter *Left-handed spiral design for effective chip evacuation *Reamer for mechanical work with a chamfer angle of 45°

＊The cutting edge features a special wavy design for roughing, which significantly reduces ＊cutting resistance. ＊Made from high-cobalt steel to increase tool life. ＊Designed for machining holes with a 1:50 taper.

＊ Chamfer angle is 15° for cutting diameters up to 3.7 mm (inclusive), and 45° for cutting diameters 3.8 mm and above. ＊The OD tolerance for integer and tenth-place specifications is H7. ＊The OD tolerance for hundredth-place specifications is: ＊2.01 to 5.03 mm is +0.004 to 0 mm(+0.004 to 0). ＊5.97 to 12.03 mm is +0.005 to 0 mm(+0.005 to 0).

* Left 20° Helix angle. * Chamfer angle: 15° for cutting diameter 3 and below; 45° for cutting diameter 3 and above.

＊Reamer for 1/50 taper hole machining.

＊Reamer for 1/50 taper hole machining. ＊Left-handed spiral design for effective chip evacuation. ＊OD-tolerance: ±0.05.

＊Reamer that can also be used manually. ＊Taper angle matched to the Morse taper.